Huddig — 1260D
Power
- Engine: Cummins turbocharged diesel engine
- Model: QSB 6,7 Step IV
- Power output: 116kW (157 hp) at 1900 rpm
- Type: Straight 6-cylinder water cooled
- Cylinder volume: 6.7 litres
- Torque: 662 Nm at 800-1400 rpm
- Max. permitted angle of lean: 45°
Transmission
- Hydrostatic. Gearbox ZF/2HL 290 with 2 gears.
- Speeds 1st 0-10 km/h low ratio.
- Speeds 2nd 0-42 km/h high ratio.
- Transmission system is separate from the operating hydraulics.
Axles
- ZF
- Automatic differential brake with planetary hub reduction gears.
Wheels
- Standard, front and rear 620/60x34.
Brake system
- Transport brakes: Servo assisted disc brakes.
- Service brake: Automatic engagement of transport brake when stationary. (Automatic function can be disengaged.)
Steering system
- Hydrostatic Orbitrol control system with dual cylinders in the center pivot.
- Steering angle ±32°
- Frame oscillation ±8°
Electrical system
- Voltage: 24V
- Batteries: 2x12V, 110Ah
- Generator output: 100A alternating current
- Starter motor output : 5.8 kW
Hydraulic system
- Load sensing hydraulic with variable axial piston pumps, 60cc+ 100cc (connected to stepped-up pump distribution box provides a total 174cc). The hydraulic system is prepared for Huddig approved environmentally compatible hydraulic oils.
- Operating pressure: 23.3 MPa (233 bar)
- Nominal max flow at 1 000 rpm: 176 l/min
- Nominal max flow at 1 500 rpm: 264 l/min
- Nominal max flow at 2 000 rpm: 352 l/min
Weight (excl buckets):
- 14,000 to 15,800 kg.
Volumes
dm3 (l)
- Oil engine: 15
- Cooling system: 20
- Fuel system: 160
- Hydraulic oil tank: 185
- Hydraulic system total: 340
- Hydraulic system total: 30
- Hydrostatic tank: 20
- Gearbox: 3
- Front and rear axles:
- Differential och hub reduction: 24
Parallel linkage loader
- Maximum lifting force: 61.5 kN (6150 kp)
- Max breaking force at bucket edge: 60 kN (6000 kp)
- Recommended bucket volume, soil: 1-1,4 m3
- Recommended bucket volume, light materials: 2-2,5 m3
Backhoe
- Breakout force at bucket edge: 103 kN (10300 kp)
- Digging force at bucket pivot: 63 kN (6300 kp)
- Lifting force at max reach without bucket: 19,1 kN (1910 kp)
- Maximum slewing torque: 3700 kpm
- Recommended bucket volume approx.: 350-450 l
Cab
- Tilting cab
- Tinted glass
- Large opening sunroof
- Driver’s seat with safety belt
- Opening side windows
- Folding passenger seat with safety belt
- Prepared space under driver’s seat for voltage transformer etc.
- Windscreen washers and wipers with intermittent front and rear
- Storage space
- Rear view mirrors 2 interior and 2 exterior folding
- Moulded floor mat
- Sun visors front and rear
- Fire extinguisher 6 kg
- Adjustable steering wheel
Gauges
- Speedometer
- Other gauges integrated in display
Central warning
The electronic control system alarms using flashing lamps and buzzers and shows text messages in the display.
Lighting
- Work lamps front x 2 (halogen)
- Work lamps rear x 2 (halogen)
- Rotating warning lamp with pivoted mounting
- Automatic interior lighting
- Automatic reversing lamp
Brake system
- Dual circuit brake system
- Electrically operated parking brake
- Automatic service brake (can be disengaged)
Backhoe
- Electric servo operated
- Hydraulic tool mounting
- Hose rupture protection valve
Load unit
- Electric servo opereated
- Prepared for 3rd hydraulic function
- Safety bar
Other
- Double command
- 12v and 24v power outlet
- Automatic main circuit breaker
- Toolkit
- Engine heater
- Heating system for hydraulic oil
- Lockable toolbox on left hand front wing
- Hose rupture protection valve on support legs
- Belly plates front and rear
- Safety start for the engine
- Electronic control system with 4 adjustable operating settings
- Foot operated electric inch pedal
Buckets
- Digging bucket G-85 with Kverneland teeth, 420 l
- Front bucket 2,50 m, volume 1450 l with scraper edge in rear face
Backhoe
- Quick hitch for 50 mm pins
- Oil-Quick
- Hydraulic output, double action Grab John type
- Hydraulic motor output, handheld tool type
- Hydraulic motor output, brusch cutter type etc
- Pipe kits for boom for hydraulic motor output
- Hydraulic output for rototilt
- Hydraulic output for rototilt at Oil-Quick
- Double float position
- Hydraulic output for cable feeder
- Hydrauluttag för kabelmatare
- Pipe kit extra hydraulic quick coupling
- Piston rod protection for bucket cylinder
Backhoe Tools
- Digging buckets
- Cable buckets
- Slope buckets
- Grid buckets
- Pusher buckets
- Grading cutters
- Asphalt cutter
- Ground frost hook
- Crane arm 2 m
Loader
- Tool lock including 3rd hydraulic function
- 3rd hydraulic function
- 3rd function continuous
- Float position
- Load suspension
Loader Tools
- Front buckets
- Grading buckets
- Snow buckets
Cab
- Tilting rear windscreen
- Automatic climate control
- Drivers’s seat, air sprung
- CD-player with radio + 2 speakers
- Cab heater output
- Work lamps, 6 x extra
- Extra rotating warning lamp
- Head restraint
- Sun visors side windows x 2
- Heated rear view mirrors
- Output lunchbox heater
- Extension kit to elevate the cab 100 mm
Other
- Several colour options
- Several tyre options
- Environmental friendly oil, operating hydraulics
- Thicker belly plates
- Central lubrication, prepared
- 7-pin towing connection
- Tow hitch including pin
- Tow hitch for cable ploughing mounted on outrigger support leg
- Protective plates at pivot
- Diesel heater cab and engine (7 day timer)
- Fuel filling pump, electric
- Generator 100 A
- Lockable toolbox, on right hand front wing
- Cruise Control
- Air Sentry
- Triple R
- Bracket for lift
- Huddig Lift
- Remote Control
- Railway equipment
- Safety equipment
Specifications with standard buckets and 520/70x34 wheel fittings
- A - Transport length: 8630 mm
- B - Wheelbase: 2600 mm
- C - Backhoe overhang: 1100 mm
- D - Height above cab: 3110 mm
- E - Transport height backhoe: 4380 mm
- F - Transport length backhoe: 2300 mm
- G - Ground clearance: 515 mm
- H - Ground clearance angle, outrigger support legs: 32°
- I - Maximum width outrigger support legs: 3700 mm
- ….Width outrigger support legs, parked position: 2460 mm
- J - Width front bucket: 2500 mm
- K - Width over wheels: 2470 mm
- r1- Swing radius outside bucket: 6288 mm
- r2- Swing radius outside wheels: 5760 mm
Back
- L - Reach: 6530 mm
- M - Depth: 4900 mm
- N - Load height: 3770 mm
- O - Digging width: 4200 mm
Front loader
- P - Reach: 2630 mm
- Q - Lift height leveled bucket: 3500 mm
- R - Load height 45° tilted bucket: 2690 mm
- S - Reach 45° tilt angle: 1030 mm
- T - Max. tilt angle: 63°
- U - Load angle: 40°
- U1- Load angle in carrying position: 46°
- V - Tilt angle ground plane: 112°
- X - Excavation depth: 90 mm